PrintMe SmartFit PLA 1.75mm 0,85kg - Rainbow
24,19 € 19,99 €
Sandėlyje
Liko 3 vnt.
SKU
5906190619068
| Grynas svoris | 850g |
|---|---|
| Permatomas | Ne |
| Gamintojas | PrintMe |
| Fluorescencinis (šviečiantis tamsoje) | Ne |
| Spalva | Daugiaspalvė |
| Plastiko tipas | PLA |
| Gijos diametras | 1.75mm |
| Platformos temperatūra | 40°C - 60°C |
| Spausdinimo temperatūra | 190°C - 220°C |
| Degradation temperature | 245 °C |
| Diameter tolerance | +/- 0.03 mm |
| Glass transition temperature (ISO 11357) | 55-60 °C |
| Melt flow rate (ASTM D1238) | 6 g / 10 min |
| Shore hardness (ASTM D2240) | 79D |
| Shrinkage (ASTM D955) | 0.1 % |
| Density (ASTM D792) | 1.23 g/cm |
| Melting point (ISO 11357) | 145-160 °C |
| Heat deflection (HTD) at 66 PSI (ISO 75) | 55 °C |
| Charpy impact, notched (ISO 180) | 0.29 J/cm² |
| Breaking force (ISO 527) | 528 N |
| Elongation at break (ISO 527) | 4.83 % |
| Tensile modulus (ISO 527) | 1472 MPa |
| Tensile strength at break (ISO 527) | 55.25 MPa |
Parašykite savo atsiliepimą